In electrical systems, high temperatures normally indicate an impending trouble. This can result from unnecessarily high resistance, short circuits, poor connections, ground fault or any other failing components common with electrical equipment. The problem must be pinpointed and rectified early enough as complete failures are normally expensive and at times can results to catastrophes. Instead of struggling to find the incipient failures through visual and other manual inspection methods which are costly, time consuming and may not pinpoint the problem, engineers are now turning to electrical infrared inspection that has proved to be the most effective alternative.
The general recommendation is that all parts of electrical system that are exposed to vibrations and or any other movements are inspected at least every six months while the rest are inspected on annual basis. For the system exposed to earthquakes, frozen winter conditions, very strong winds and tsunamis, there is a need for more frequent testing.
The target is to pinpoint any damages or potential threats resulting from improper installations, points of weaknesses, contamination, corrosion or worn out devices. The other problems can result from ground faults and improper assembly leading to increased resistance which is the recipe for overheating which on its own is a danger to the rest of the system and the surrounding objects. If left unchecked power outages are the least of problems that can result.
The other benefit of this survey is that there is no need to shut down the system. It is a non-contact a nondestructive form of testing (NDT) that allows for work continuation without interrupting system production. The equipment get inspected under normal loads and the normal operating condition by scanning devices to reveal the existing and emerging problems before it is too late.
If you choose to use this form of testing, there is no need to shut down any part of the system as the testing is non-contact and nondestructive (NDT) at the same time. This means that all components can be inspected under their normal loads in the normal operating system. It involves scanning with the aim of revealing improper connections, damages and any form of flaws well in advance before they can result to any disaster.
Given that thousands of devices can be tested within hours, it has proven to be more convenient, highly effective and very efficient method of maintaining electrical system replacing the physical inspection. It is also endorsed by the National Fire Protection Association and the InterNational Electrical Testing Association among other bodies that now advocates for its use.
This form of testing and survey therefore saves engineers millions of dollars improving profitability and significantly decrease the expenses in the areas of operations, testing and maintenance in general. With this convenience and financial benefits, this is a technology you cannot afford to miss in this century if you think of remaining in business.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
The general recommendation is that all parts of electrical system that are exposed to vibrations and or any other movements are inspected at least every six months while the rest are inspected on annual basis. For the system exposed to earthquakes, frozen winter conditions, very strong winds and tsunamis, there is a need for more frequent testing.
The target is to pinpoint any damages or potential threats resulting from improper installations, points of weaknesses, contamination, corrosion or worn out devices. The other problems can result from ground faults and improper assembly leading to increased resistance which is the recipe for overheating which on its own is a danger to the rest of the system and the surrounding objects. If left unchecked power outages are the least of problems that can result.
The other benefit of this survey is that there is no need to shut down the system. It is a non-contact a nondestructive form of testing (NDT) that allows for work continuation without interrupting system production. The equipment get inspected under normal loads and the normal operating condition by scanning devices to reveal the existing and emerging problems before it is too late.
If you choose to use this form of testing, there is no need to shut down any part of the system as the testing is non-contact and nondestructive (NDT) at the same time. This means that all components can be inspected under their normal loads in the normal operating system. It involves scanning with the aim of revealing improper connections, damages and any form of flaws well in advance before they can result to any disaster.
Given that thousands of devices can be tested within hours, it has proven to be more convenient, highly effective and very efficient method of maintaining electrical system replacing the physical inspection. It is also endorsed by the National Fire Protection Association and the InterNational Electrical Testing Association among other bodies that now advocates for its use.
This form of testing and survey therefore saves engineers millions of dollars improving profitability and significantly decrease the expenses in the areas of operations, testing and maintenance in general. With this convenience and financial benefits, this is a technology you cannot afford to miss in this century if you think of remaining in business.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
About the Author:
Read more about Using Electrical Infrared Inspection Is A Sure Way To Save Time And Money.
Aucun commentaire:
Enregistrer un commentaire